Boat owners, you know the frustrations of water spots and stains on your boat’s exterior surface. These unsightly marks detract from your water vessel’s overall beauty. 

Have you heard of a product called Starke Venom Water Spot and Stain Remover? 

Reviewed as the best water spot and stain remover on the market, Venom by Starke is in a class of boat detailing products considered “new generation” - it literally eats minerals and other contaminants on the paint surface while not harming paint or gel coat finishes! It's a revolutionary product that has the pro detailing industry raving.

Starke Venom Spot Remover Saves You Time

Starke engineers and scientists went all out on Venom Water Spot and Stain Remover and came up with a quality product that saves you massive amounts of time cleaning and detailing. Venom is made of a proprietary formula that has the consistency that “gels” to the boat’s surfaces where it begins to perform it’s contaminant-removal process. 

Venom Spot Remover is even safe to to use on ceramic coated surfaces. Venom is also safe to use on glass, paint and metal. So, not only is Venom Water spot and stain remover awesome for boats, it is also great for cars, RVs and cycles. 

Venom is great to use before buffing or light polishing. Keep in mind, that before doing any work on exterior substrates, that it is essential to clean the surface of dust and dirt. Conducting a prewash and rinse will ensure dirt particles are removed so that scratches and swirl marks are prevented. 

Best Steps - How to Effectively Use Venom Spot and Stain Remover

Rinse and Wash the Boat Surface

Make sure that the surface is clean and free from dust, dirt and debris before using the product on your boat (car, cycle, RV). Using the product without cleaning the dust and dirt will scratch the surface of your paint…leaving you with more work to be done. Clean the boat’s surface using a good quality boat soap before using Starke Venom.  And make sure to use microfiber cloths!

Application of Venom Spot Remover

To use the product, put a few drops of the Starke Venom water spot and stain remover on the microfiber cloth and start applying it on the surface of your boat. You may want to wear cleaning gloves, as the formulation does contain an acid safe for all substrates including gel coats. 

Work Venom Spot Remover in Sections

Start out by selecting a small area to apply the product, typically 2 feet by 3 feet, and work your way vertically then horizontally. Once you finish the process on one section, move to the next section applying Venom Spot Remover using microfiber pads and cloths. You can use straight or circular strokes to apply the product. Ensure that the strokes are uniform and cover the entire area on which you are working to achieve a uniform finish over the entire boat surface. Do not allow Starke Venom to dry to the surface of the vessel, this can cause damage to metals, plastics and glass. Always Rinse down the section you've applied Starke Venom on with water to ensure no remaining acids are on the surface.

Use Venom Spot Remover on Cool Surfaces

The Venom Water Spot Remover formula dries off quickly on a warm boat surface. The best time to apply Venom is during morning or evening times to ensure that the boat surface is cold and not warm. Applying Venom directly in the sun and on hot surfaces like paint and glass can cause possible etching and a ton of extra work (more on this in the video below at minute 4:08). Therefore, it is essential, because of the acidic nature of Venom, to apply the product on cool/cold surfaces and out of direct sunlight. 

Getting a Shine That Wows - Venom is Amazing

Venom Water Spot and Stain Remover is a premium product by Starke used by professional boat detailers and DIYers. The product’s unique formula saves detailing time and puts more time back in your day. Following the steps above and watching the video will literally make your boat looking brand-spanking new. From paint, metal and glass application, use Venom to remove water spots and stains for an amazing shine!

How To use Venom Video

 

May 14, 2022 — John TenBrink