Starke Venom Water Spot Remover

starke-venom-water-spot-remover
Made in USA
Starke Venom Water Spot and Stain Remover

Venom is a new generation water spot remover that is safe to use on finshes that have been ceramic coated. In addition, it is also safe to use glass, paint, gel coat, and metal. The formula has a consistentcy that allows it to gel to the substrate where it then starts to lightly eat away at minerals and other contaminants.

Venom can also be used as a pre wipe before buffing or light polishing. This benefit allows you to save a massive amount of time because you are able to begin polishing a very clean substrate which make your job easier.

We are confident when we say there is nothing else out there on the market like this. Developed by professional detailers, this is a must have product in your arsenal!

Bottle Size:
from
$24.99
Product Benefits
Venom can remove minerals and stains from various types of substrates. Do you have problems with water spots on your paint or glass? Do you have a stubborn tannin stain or rust that needs to be removed. Venom can help break thru mineral layers without harming your paint, gel coat, glass, or metals.
About Technology
Ceramic nano coatings are synthetic molecules that bond on a sub atomic nano-molecular level to create a hard, super hydrophobic surface. Because the particles are so small, when applied to a surface, they seal all the pores making the surface hydrophobic (water-repellent), but also resistant to UV, scratches, chemicals, extreme heat.
files/water.jpg
preview
TREATED
preview
NON TREATED
Our sophisticated formula is tough on minerals and stains but gentle on your boat.
Check out how Venom eats away at these nasty water spots. It gels two the hard top with easy application using a microfiber pads. After letting the formula sit for 30-60 seconds, remove excess with microfiber towel. Viola, spots are gone!
These are some of the most common questions and answers about our product.
These are some of the most common questions and answers about our product.
Repel Pro has a hardness of 9H, which is currently the best rating in the industry. The marine grade formula is composed of SiO2 nano particles suspended in our advanced carrier agent with solids of roughly 90%.
No, we do not suggest applying wax or sealant over the coating because it will create a static layer that will attract contaminates. Repel Pro is superior to traditional waxes and polymer sealants, and once applied, you will never need to wax again, only maintain and touch up the coating as time goes by.
Any polishing or paint correction along with surface decontamination should be completed before the application of Repel Pro. If you’re happy with the condition of your finish, make sure the paint or gel coat has been thoroughly washed and decontaminated. Once the surface has been washed with Dawn, clean the panels with Prep Wipe (IPA) to remove any remaining polish, wax, and surface contaminants before apply the coating.
Repel Pro requires washing and upkeep. This upkeep is easier with a coating than it is with wax. The better you maintain the coating the longer it will last. We recommend using Replenish SiO2 maintenance spray every 1-3 months and washing with Pure Clean boat soap. The cost is minimal compared to waxing every three months.
Repel Pro can be applied to most exterior surfaces including gel coat, paint, metal, stainless steel, chrome, plastic, acrylic glass and isinglass.
Reviews
Many people use our product, and we are glad that it is really useful for our customers. And here are a few stories that they shared with us.
You can try our product right now!
SHOP NOW!
BACK TO TOP

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods